Inhaltsverzeichnis

Note: Attention: Work in progress - page under construction

UHSDR development - toolchain for Debian

Preconditions, Assumptions, Scope

GNU ARM toolchain for Linux

Note: Important: use latest version of tool chain from web sites below. DO NOT use the ARM toolchain that comes with your Linux distribution

See https://gnu-mcu-eclipse.github.io/toolchain/arm/install/ for general explanations

Install Arm toolchain for Linux

$ mkdir -p ${HOME}/opt
$ cd ${HOME}/opt
$ tar xjf ~/Downloads/gcc-arm-none-eabi-7-2017-q4-major-linux.tar.bz2 
$ chmod -R -w /home/gerd/opt/gcc-arm-none-eabi-7-2017-q4-major/  
$ /home/gerd/opt/gcc-arm-none-eabi-7-2017-q4-major/bin/arm-none-eabi-gcc-7.2.1 --version
arm-none-eabi-gcc-7.2.1 (GNU Tools for Arm Embedded Processors 7-2017-q4-major) 7.2.1 20170904 (release) [ARM/embedded-7-branch revision 255204]
Copyright (C) 2017 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

The complete toolchain documentation is available in the …/share/doc/pdf/ folder.

GDB - GNU Debugger & OpenOCD

Check that GDB is installed in your Linux distribution by entering

$ gdb

The output should look like this:

GNU gdb (Debian 7.12-6+b1) 7.12.0.20161007-git
Copyright (C) 2016 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
[...]

If missing install with

apt-get install gdb

Installation:

$ cd ${HOME}/opt
$ tar xvf ~/Downloads/gnu-mcu-eclipse-openocd-0.10.0-7-20180123-1217-centos64.tgz
$ chmod -R -w gnu-mcu-eclipse/openocd/0.10.0-7-20180123-1217

Check OpenOCD installation:

$ ${HOME}/opt/gnu-mcu-eclipse/openocd/0.10.0-7-20180123-1217/bin/openocd --version

Output should be something like this:

GNU MCU Eclipse 64-bits Open On-Chip Debugger 0.10.0+dev-00404-g20463c28 (2018-01-23-12:24)
Licensed under GNU GPL v2
For bug reports, read
	http://openocd.org/doc/doxygen/bugs.html

Install UDEV rules for USB OpenOCD probes:

# cp ${HOME}/opt/gnu-mcu-eclipse/openocd/0.10.0-7-20180123-1217/contrib/60-openocd.rules /etc/udev/rules.d/
# udevadm control --reload-rules
# usermod -aG plugdev $USER

Install OpenOCD Debugging plugin, see here

Update OpenOCD path, see here

OpeOCD manual from sourceforge
eclipse & st-link/v2 tutorial

In Virtualbox make sure the STM-link/V2 adapter is connected through to virtual machine (check machine settings→USB)

In Eclipse hit green „Debug“ button.

GNU MCU Eclipse and CDT

$ cd /home/gerd/opt/
$ mkdir GnuMcuEclipse
$ cd GnuMcuEclipse/
$ tar xvf /home/gerd/Downloads/20180125-1917-gnumcueclipse-4.3.2-oxygen-2-linux.gtk.x86_64.tar.gz 

Make the GNU Arm toolchain location known to Eclipse in Project→Properties→C/C++ Build→Environment→PATH. add the path to GCC here (in this example we would add /home/gerd/opt/gcc-arm-none-eabi-7-2017-q4-major/bin ).

Launch Eclipse to test installation

/home/gerd/opt/GnuMcuEclipse/eclipse/eclipse 

Build Test Project to check all is ok

Next step: import UHSDR into gnu arm eclipse

UHSDR development - import UHSDR into gnu arm eclipse