en:uhsdr_dev:toolchain [Afu

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
{{tag>english}}{{tag>review}}
<bootnote> Attention: Work in progress - page under construction</bootnote>

===== UHSDR development - toolchain for Debian =====

==== Preconditions, Assumptions, Scope ====
  * Using Debian version buster/sid
  * Install on Win10 PC with Virtualbox
    * ARM toolchain for Linux
    * GDB
    * Eclipse
    * Check installation with test project

=== GNU ARM toolchain for Linux ===
<bootnote>Important: use latest version of tool chain from web sites below. DO NOT use the ARM toolchain that comes with your Linux distribution</bootnote>

See [[https://gnu-mcu-eclipse.github.io/toolchain/arm/install/]] for general explanations

=== Install Arm toolchain for Linux ===
  * Download the latest Linux install tarball file from ARMDeveloper 
  * Link to download: https://developer.arm.com/open-source/gnu-toolchain/gnu-rm/downloads
  * Assuming downloaded file is in /home/gerd/Downloads, open terminal with user gerd:
<code>
$ mkdir -p ${HOME}/opt
$ cd ${HOME}/opt
$ tar xjf ~/Downloads/gcc-arm-none-eabi-7-2017-q4-major-linux.tar.bz2 
$ chmod -R -w /home/gerd/opt/gcc-arm-none-eabi-7-2017-q4-major/  
</code>
  * Test if the compiler is functional; use the actual install path:
<code>
$ /home/gerd/opt/gcc-arm-none-eabi-7-2017-q4-major/bin/arm-none-eabi-gcc-7.2.1 --version
</code>
  * Output should be like this:
<code>
arm-none-eabi-gcc-7.2.1 (GNU Tools for Arm Embedded Processors 7-2017-q4-major) 7.2.1 20170904 (release) [ARM/embedded-7-branch revision 255204]
Copyright (C) 2017 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
</code>
The complete toolchain documentation is available in the .../share/doc/pdf/ folder.
\\
=== GDB - GNU Debugger & OpenOCD ===
Check that GDB is installed in your Linux distribution by entering
<code>
$ gdb
</code>
The output should look like this:
<code>
GNU gdb (Debian 7.12-6+b1) 7.12.0.20161007-git
Copyright (C) 2016 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
[...]
</code>
If missing install with
<code>
apt-get install gdb
</code>

  * Latest GNU MCU OpenOCD binaries can be found [[https://gnu-mcu-eclipse.github.io/openocd/releases/|here]].
  * This leads e.g. to [[https://github.com/gnu-mcu-eclipse/openocd/releases/tag/v0.10.0-7-20180123/|these binary files]]

Installation:
<code>
$ cd ${HOME}/opt
$ tar xvf ~/Downloads/gnu-mcu-eclipse-openocd-0.10.0-7-20180123-1217-centos64.tgz
$ chmod -R -w gnu-mcu-eclipse/openocd/0.10.0-7-20180123-1217
</code>

Check OpenOCD installation:
<code>
$ ${HOME}/opt/gnu-mcu-eclipse/openocd/0.10.0-7-20180123-1217/bin/openocd --version
</code>
Output should be something like this:
<code>
GNU MCU Eclipse 64-bits Open On-Chip Debugger 0.10.0+dev-00404-g20463c28 (2018-01-23-12:24)
Licensed under GNU GPL v2
For bug reports, read
	http://openocd.org/doc/doxygen/bugs.html
</code>

Install UDEV rules for USB OpenOCD probes:
<code>
# cp ${HOME}/opt/gnu-mcu-eclipse/openocd/0.10.0-7-20180123-1217/contrib/60-openocd.rules /etc/udev/rules.d/
# udevadm control --reload-rules
# usermod -aG plugdev $USER
</code>

Install OpenOCD Debugging plugin, see [[https://gnu-mcu-eclipse.github.io/openocd/install/|here]]

Update OpenOCD path, see [[https://gnu-mcu-eclipse.github.io/openocd/install/|here]]

{{ :en:uhsdr_dev:openocd.pdf |OpeOCD manual from sourceforge}} \\
[[https://community.particle.io/t/tutorial-using-eclipse-st-link-v2-openocd-to-debug/10042|eclipse & st-link/v2 tutorial]]

In Virtualbox make sure the STM-link/V2 adapter is connected through to virtual machine (check machine settings->USB)

In Eclipse hit green "Debug" button.


=== GNU MCU Eclipse and CDT ===
  * Install Eclipse and CDT
  * Download GNU MCU Eclipse IDE for C/C++ Developers from GitHub Releases
  * Releases are archived here: See https://github.com/gnu-mcu-eclipse/org.eclipse.epp.packages/releases/
  * Download latest release. At time of writing this is [[https://github.com/gnu-mcu-eclipse/org.eclipse.epp.packages/releases/download/v4.3.2-20180125-o2/20180125-1917-gnumcueclipse-4.3.2-oxygen-2-linux.gtk.x86_64.tar.gz]]
  * Release Notes for latest release here: https://gnu-mcu-eclipse.github.io/blog/2018/01/25/plugins-v4.3.2-201801250917-released/
<code>
$ cd /home/gerd/opt/
$ mkdir GnuMcuEclipse
$ cd GnuMcuEclipse/
$ tar xvf /home/gerd/Downloads/20180125-1917-gnumcueclipse-4.3.2-oxygen-2-linux.gtk.x86_64.tar.gz 
</code>

Make the GNU Arm toolchain location known to Eclipse in Project->Properties->C/C++ Build->Environment->PATH. add the path to GCC here (in this example we would add /home/gerd/opt/gcc-arm-none-eabi-7-2017-q4-major/bin ).

=== Launch Eclipse to test installation ===
  * Launch eclipse to test installation
<code>
/home/gerd/opt/GnuMcuEclipse/eclipse/eclipse 
</code>

=== Build Test Project to check all is ok ===
  * Build a test project to see if all ok https://gnu-mcu-eclipse.github.io/tutorials/blinky-arm/

=== Next step: import UHSDR into gnu arm eclipse ===
[[en:uhsdr_dev:uhsdrbuild|UHSDR development - import UHSDR into gnu arm eclipse]]