Differences

This shows you the differences between two versions of the page.

--- en:uhsdr:uhsdrtroubleshooting [06.02.2018 16:42] – created df9ts_user
+++ en:uhsdr:uhsdrtroubleshooting [12.02.2018 20:03] – df9ts
@@ Line 43: / Line 43: @@
 === 3. Debug cable ===
 The debug cable shouldn't be longer than 10 cm. 3 to 4 connections are needed.
-|< 40% 50% 50% >|
+|< 60% 50% 25% 25% >|
-|  ST-link UI  |  JP8  |
+|ST-link adapter  |OVI40 UI JP8  |Remark  |
-|  JTAG-9 SWCLK  |   JP8 Pin 4  |
+|Pin-13 TRACESWO  |JP8 Pin 1     |Debug Output  |
-|  JTAG-7 SWDIO  |  JP8 Pin 3  |
+|Pin-15 NRST      |JP8 Pin 2     |Reset         |
-|  JTAG-20 Gnd  |  JP8 Pin 6  |
+|Pin-07 SWDIO     |JP8 Pin 3     |Debug I/O     |
-|  not essential: Signal: Reset  |  JP8 Pin 2  |
+|Pin-09 SWCLK     |JP8 Pin 4     |Debug Clock   |
+|Pin-01 MCU VDD   |JP8 Pin 5     |VDD from MCU  |
+|Pin-20 Gnd       |JP8 Pin 6     |Ground        |
 {{ :uhsdr:en.dm00026748.pdf |Beschreibung ST-Link V2 und ST-Link ISO Adapter, Pin out}}