Diskussions- und Newsboard des DARC-Ortsverbandes I40
allgemeine Kategorie => OVI40 SDR Projekt (English AND German discussions around OVI40 SDR project) => Message started by: DF8OE on 04. December 2017, 17:13:33

Title: OVI40 UI PCB and LCDs can be preordered / Vorbestellungen sind angelaufen
Post by: DF8OE on 04. December 2017, 17:13:33

Hi,

I have finished ordering automats. Hopefully they are working as expected - no time for testing ::)

English Order Page (https://www.electronicrepair.de/ovi40-order-page/)
The journey begins...
Please be patient with me if not everything is working perfectly at the start - I will do my very best, I promise!

Ab sofort können Vorbestellungen gemacht werden. Ich hoffe, dass der Automat so arbeitet wie ich es mir denke - keine Zeit für Betatests ::)
Die Reise kann losgehen...
Deutsche Bestellseite (https://www.electronicrepair.de/ovi40-bestellformular/)

Bitte seid geduldig mit mir wenn es am Anfang noch nicht so rund läuft - ich werde mein Bestes geben, versprochen!

vy 73
Andreas, DF8OE (self employeed technician / selbstständiger Techniker: electronicrepair.de)

Title: Re:OVI40 UI PCB and LCDs can be preordered / Vorbestellungen sind angelaufen
Post by: DF8OE on 04. December 2017, 18:58:36

Dank eurer Hilfe habe ich "am lebenden Herzen" folgende Dinge verbessert:

  • es ist jetzt nicht mehr möglich, "leere" Bestellungen abzuschicken
  • Beim "Auswahl" Dropdown steht beschrieben, was ausgewählt werden kann
  • Die Anti-Spam-Maßnahmen wurden verbessert, damit keine "guten" Bestellungen mehr abgelehnt werden


  • Danke!

    Die persönliche Beantwortung der Bestellungen werde ich morgen erledigen. Für heute ist mir das echt zuviel Arbeit ::)

    vy 73
    Andreas

Title: Re:OVI40 UI PCB and LCDs can be preordered / Vorbestellungen sind angelaufen
Post by: AC9QP on 05. December 2017, 02:13:20

I think my order got submitted twice as I got the emails twice. Reopened my browser and it still had the after-submission page up in a tab so that might have done it. Might want to make sure that the page doesn't resubmit on reload.

Title: Re:OVI40 UI PCB and LCDs can be preordered / Vorbestellungen sind angelaufen
Post by: DF8OE on 05. December 2017, 06:55:50

No. Resubmission would be an massive security hole / error of browser. If I try a reopen on Chromium / Google Chrome I get a box which tells me:
"This page is the result of a form submission. Do you want to submit again? OK/CANCEL"

This would be correct behaviour of browser. I hope there is none outside in the wilderness which submits form data again without asking. If so, users should know what this browser does...

73
Andreas

Title: Re:OVI40 UI PCB and LCDs can be preordered / Vorbestellungen sind angelaufen
Post by: AC9QP on 05. December 2017, 17:30:19

I don't know what happened, but I've got both emails for Order 1512417465 and Order 1512439025 both with the same content. I only meant to order once. The second happened after I woke my computer from sleep. I didn't see any re-submit notification.

Title: Re:OVI40 UI PCB and LCDs can be preordered / Vorbestellungen sind angelaufen
Post by: DF8OE on 05. December 2017, 19:27:45

I think this is a browser issue. Your browser seems to fill forms and send them without asking you...

Very dangerous behaviour.

I have cleaned up the second order manually but I can nothing do against that.

A page which is the result of a form submit cannot appear again without an important misfunction of the browser. Please tell me what browser and what OS you are using - it is interesting...

vy 73
Andreas

Title: Re:OVI40 UI PCB and LCDs can be preordered / Vorbestellungen sind angelaufen
Post by: DF8OE on 06. December 2017, 09:19:29

Hallo an alle,

ich werde jetzt alle vorangegangenen Posts mit Inhalten wie "Mails angekommen / Zahlung getätigt" etc. löschen. Sie sind gut gemeint, aber sie blähen den Thread ohne Nutzwert für andere auf.

Bitte seht in Zukunft auch von solchen Posts ab. Wenn etwas NICHT geklappt hat, sendet mir bitte eine PM. Auch "positive feedbacks" sind für mich schwierig - ich nehme sie gerne zur Kenntnis, kann aber nicht auf jede solche PM persönlich antworten.

vy 73
Andreas

Title: Regarding 'charges at order' / Betrifft 'Anfangszehlungen'
Post by: DF8OE on 06. December 2017, 10:22:02

Hallo an alle,

die Frage ist in der Tat schon öfter vorgekommen. Ich dachte ich hätte sie in meiner automatisierten Antwort auf die Order bereits erschöpfend beantwortet - das scheint aber nicht der Fall zu sein...

Es gibt viele verschiedene Szenarien, je nachdem, wo die Sendungen hingehen, bezüglich Versandkosten, mit/ohne Mehrwertsteuer etc. Deswegen kann ich keinen für alle gleichen Preis auf die Webseite schreiben.

Zusätzlich möchte ich nicht vorab eine komplette Bezahlung - zumindest nicht bei jeder Kombination von Artikeln. Es wird also eine Vorabzahlung angefordert, deren Höhe mein System berechnet. Bitte fragt mich nicht warum das so ist - ich habe definitiv nicht die Zeit, das alles auseinanderzuklamüsern. Auf jeden Fall verbietet es mein Ham-Spirit und meine Geschäftsphilosophie, Wochen vor der Auslieferung schon den vollen Betrag zu berechnen. Es gibt also bei einigen Bestellungen noch eine zweite Rechnung wenn die Sachen von mir aus versandbereit sind.

Es ist auch durchaus möglich, dass bei zwei identischen Bestellungen unterschiedliche Vorabzahlungen rauskommen. Der Algoritmus dahinter ist kompliziert.

In fact, the question has occurred more often. I thought I already had exhaustively answered them in my automated response to the order - but that does not seem to be the case ...

There are many different scenarios, depending on where the shipments go, in terms of shipping costs, with / without VAT, etc. That's why I can not write the same price on the website for all.

In addition, I do not want a full payment in advance - at least not for every combination of items. So it is requested an upfront payment, the amount of which my system calculates. Please do not ask me why that is - I definitely do not have the time to explain it all out. In any case, it forbids my Ham spirit and my business philosophy, weeks before delivery to charge the full amount. So there are some orders where it will get a second bill if the things are ready to ship from me.

It is possible that there can be different precharges for identical orders. The way this is calculated is not simple.

vy 73
Andreas

Title: Re:OVI40 UI PCB and LCDs can be preordered / Vorbestellungen sind angelaufen
Post by: hb9trt on 07. December 2017, 07:06:34

Hallo Andreas,

Das BOM File im Wiki ist ja für die Beta Phase. Das ist da auch so beschrieben und es soll noch Änderungen geben, beispielsweise beim SD Cardreader. Sind diese Änderungen schon bekannt? GIbts noch andere Teile die beim aktuellen BOM nicht mehr richtig sind. Ich möchte die Teile beschaffen und es wäre natürlich gut, wenn das BOM File dann auch stimmt. Die 603er Bauteile bleiben? Oder werden diese durch 805er ersetzt?

Gruss
Reto/hb9trt

Title: Re:OVI40 UI PCB and LCDs can be preordered / Vorbestellungen sind angelaufen
Post by: DF8OE on 07. December 2017, 08:44:07

Hallo Reto,

danke für den Hinweis. Ich habe die BOM immer wenn es Änderungen gab aktualisiert aber hatte versäumt, den "Vorläufigkeitssatz" rauszunehmen ::)

vy 73
Andreas

Title: Re:OVI40 UI PCB and LCDs can be preordered / Vorbestellungen sind angelaufen
Post by: DD2XJ on 15. December 2017, 06:39:06

Hallo Andreas,

wann ist die Deadline für Bestellungen, ich versuche gerade im E12 die Interessenten zu bündeln, so das wir in den nächsten Tagen eine Sammelbestellung bei dir platzieren können.

viele Grüße aus dem Norden.
Jürgen

P.S.
wir hoffen das es auch in 2018 mal wieder ein Workshop bei euch gibt.

Title: Re:OVI40 UI PCB and LCDs can be preordered / Vorbestellungen sind angelaufen
Post by: DF8OE on 15. December 2017, 06:45:37

Die Bestellungen des ersten Batch sind <eigentlich> abgeschlossen. Aber ich bin ja vorausschauend und habe einen "Überhang". Hier gilt: wer zuerst kommt, mahlt zuerst. Es wird auch weitere Batches geben - natürlich. Also wenn ihr zum Entschliessen nicht Wochen braucht, könntet ihr was aus dem Überhang bekommen...

Workshops etc. wird es natürlich auch wieder geben. Und an einer Karte, wo sich jeder OVI40-Bauer eintragen kann, arbeite ich gerade. Ich möchte die lokale Community-Arbeit fördern.

vy 73
Andreas

Title: Re:OVI40 UI PCB and LCDs can be preordered / Vorbestellungen sind angelaufen
Post by: dg9bfc_sigi on 18. December 2017, 21:28:33

wie sieht es mit entwicklung der rf boards aus?!?

hassu da schon ne zeitplanung??

Title: Re:OVI40 UI PCB and LCDs can be preordered / Vorbestellungen sind angelaufen
Post by: DL8EBD on 19. December 2017, 09:07:02

guckst Du:

https://www.amateurfunk-sulingen.de/forum/index.php?board=18;action=display;threadid=892

Title: Re:OVI40 UI PCB and LCDs can be preordered / Vorbestellungen sind angelaufen
Post by: peter_77 on 19. December 2017, 09:54:29

Fehlende Rechtschreibung und nun auch noch Slang Sprache...das Niveau sinkt kontinuierlich.... :-[

Title: Re:OVI40 UI PCB and LCDs can be preordered / Vorbestellungen sind angelaufen
Post by: dl1avx on 28. February 2018, 14:36:56

Hallo Andreas,

ich hatte am 17.02. meine Bestellung 1518882659 aufgegeben.
Es kam auch eine Bestätigung, dass die Bestellung in der Datenbank ist und ein kurze Info-Mail das binnen 24h eine EMail mit weiteren Information kommen soll. Bisher habe ich leider keine bekommen...
Ist da etwas untergegangen?


73! de Peter, dl1avx

Title: Re:OVI40 UI PCB and LCDs can be preordered / Vorbestellungen sind angelaufen
Post by: DF8OE on 28. February 2018, 14:50:24

Nein. Aktuell bearbeite ich die Reste der Bestellungen, die bis zum 31.12. bei mir eingegangen sind. Danach folgen die aus dem Januar. Die "ganz frischen" (also die aus dem Februar) kommen danach.

vy 73
Andreas

Title: Re:OVI40 UI PCB and LCDs can be preordered / Vorbestellungen sind angelaufen
Post by: dl1avx on 28. February 2018, 16:07:02

Supi, danke für deine schnelle Rückmeldung!

73! de Peter, dl1avx

Title: Re:OVI40 UI PCB and LCDs can be preordered / Vorbestellungen sind angelaufen
Post by: ON4KCY on 08. March 2018, 23:09:31

Hello Andreas,

I’m perhaps quite late but I wonder if it is still possible to order a kit (or soldered IU board).
I would prefer a kit

I built a mcHF last year and woud give a try with the Ovi40.

Did you have any indication of the availability of the UI (and eventually RF)?
Is it still pre-order or we can order right now ?

Did you intent to have about the same dimensions for the RF boards as those of the UI ?

In any case, very nice project.
Congrats and thanks for sharing with us.

73
Yves ON4KCY

Title: Re:OVI40 UI PCB and LCDs can be preordered / Vorbestellungen sind angelaufen
Post by: AA6MU on 15. February 2019, 14:53:06

Hello,

I've ordered couple PCB for OVI40 two month ago, any update on the order?

Vadim
AA6MU

Title: Re:OVI40 UI PCB and LCDs can be preordered / Vorbestellungen sind angelaufen
Post by: DF8OE on 15. February 2019, 16:24:04

I do not have open orders for PCBs. Pse can you tell me the order-No. you have got to info@electronicrepair.de ? There is something misaligned..

vy 73
Andreas

Title: Re:OVI40 UI PCB and LCDs can be preordered / Vorbestellungen sind angelaufen
Post by: AA6MU on 15. February 2019, 19:25:12

I've just forwarded you two emails from your ordering system.
order ## is 1546124630

Title: Re:OVI40 UI PCB and LCDs can be preordered / Vorbestellungen sind angelaufen
Post by: DF8OE on 16. February 2019, 08:20:04

Info ro all readers:

It is solved now ::) Order contained LCD panel too which is not on stock...

vy 73
Andreas

Title: Re:OVI40 UI PCB and LCDs can be preordered / Vorbestellungen sind angelaufen
Post by: DJ0RG on 31. October 2019, 12:51:23

Moin,

ich wäre mal wieder an einem Update zur Bestellbarkeit der OVI40 UI interessiert. Die Bestellseite habe ich vor 1,5 Jahren für PCB + Display benutzt, ob da eine Bestätigungsemail gekommen ist weiss ich nicht mehr, glaube aber nicht. Ich würde ja glatt neu bestellen, vorher aber gerne wissen wie es um das Projekt steht. Es gibt hier viele technische Infos rund um einen Eigenbau SDR, aber konkrete Infos zur Bestellbarkeit habe ich schon ein halbes Jahr lang nicht mehr gesehen.

Wie schaut's denn aktuell aus?

Mit besten Grüßen
Jörg DJ0RG

Title: Re:OVI40 UI PCB and LCDs can be preordered / Vorbestellungen sind angelaufen
Post by: DL8EBD on 31. October 2019, 13:17:08

das PCB für die UI in Version 1.8 und das fürs LCD konnte ich die Tage noch problemlos beim Andreas bestellen.
Bauteilsätze sind aber nicht verfügbar....

Title: Re:OVI40 UI PCB and LCDs can be preordered / Vorbestellungen sind angelaufen
Post by: DF8OE on 31. October 2019, 14:19:34

Genau so sieht es aus. Bauteilsätze werde ich erst wieder auflegen, wenn es etwas "RF-mäßiges" gibt was nicht vom mcHF stammt und was zumindest rudimentär schon nutzbar ist.

vy 73
Andreas

Title: Re:OVI40 UI PCB and LCDs can be preordered / Vorbestellungen sind angelaufen
Post by: DL4HAO_Dietmar on 01. November 2019, 18:22:34

Hallo Andreas,
einige warten ja auch noch auf die Zusendung der aufgebauten UI-Board Platine (erste Serie). Die, wenn ich mich richtig erinnere, August 2019 dann bei den letzten Vorbestellern eingetroffen sein sollte. Wie ist da der Stand der Dinge? Alle sind ja noch nicht ausgeliefert worden? (zumindest ich habe meine noch nicht bekommen)

vy73,
Dietmar, DL4HAO

Title: Re:OVI40 UI PCB and LCDs can be preordered / Vorbestellungen sind angelaufen
Post by: DF8OE on 02. November 2019, 08:24:17

Es fehlen in der Tat immer noch ein paar. Die sind schon angefangen in der Bestückung, aber aus Zeitmangel komme ich einfach nicht so weiter, wie es sein sollte.

Also Status "in Arbeit". Immer wenn ich eine fertig habe geht sie sofort raus.

vy 73
Andreas

Title: Re:OVI40 UI PCB and LCDs can be preordered / Vorbestellungen sind angelaufen
Post by: wa2ohf on 02. February 2021, 18:08:24

I entered all the lines to order a reassembled board and it will not let me enter USA and never completes the order ?
Art

Title: Re:OVI40 UI PCB and LCDs can be preordered / Vorbestellungen sind angelaufen
Post by: DF8OE on 03. February 2021, 08:27:59

Sorry - no assembled boards or kits available at the moment (and the next months). Only "bare PCBs".

vy 73
Andreas

Title: Re:OVI40 UI PCB and LCDs can be preordered / Vorbestellungen sind angelaufen
Post by: wa2ohf on 06. February 2021, 18:01:05

Quote from: wa2ohf on 02. February 2021, 18:08:24
I entered all the lines to order a reassembled board and it will not let me enter USA and never completes the order ?
Art

Title: Re:OVI40 UI PCB and LCDs can be preordered / Vorbestellungen sind angelaufen
Post by: k9aeg on 17. February 2021, 02:11:58

Am interested in your reply as I want to pre-order also.

Denny, k9aeg

Title: Re:OVI40 UI PCB and LCDs can be preordered / Vorbestellungen sind angelaufen
Post by: DF8OE on 17. February 2021, 05:57:56

Please stay tuned the next weeks. We are just moving intensively to the new DUC/DDC-PCB which will cover 10KHz...76MHz and using optional fitted AD936f 70MHz...6GHz, too (not just finished FPGA Firmware for the AD936x and final PCBs are under construction). This will change UI a little bit. All owners of "old" PCBs have to solder some wires to fir it to the new UI - this will be eliminated in new PCB.

vy 73
Andreas

Title: Re:OVI40 UI PCB and LCDs can be preordered / Vorbestellungen sind angelaufen
Post by: DL4HAO_Dietmar on 17. May 2021, 19:08:24

Hallo Andreas,
inzwischen sind weitere 1,5 Jahre vergangen, und ich habe leider noch immer nichts bekommen.
(bezahlte, fertig bestückte Platine)

vy73
Dietmar, DL4HAO
Quote from: DF8OE on 02. November 2019, 08:24:17
Es fehlen in der Tat immer noch ein paar. Die sind schon angefangen in der Bestückung, aber aus Zeitmangel komme ich einfach nicht so weiter, wie es sein sollte.

Also Status "in Arbeit". Immer wenn ich eine fertig habe geht sie sofort raus.

vy 73
Andreas

Title: Re:OVI40 UI PCB and LCDs can be preordered / Vorbestellungen sind angelaufen
Post by: DF8OE on 18. May 2021, 04:33:24

Gibt es leider immer noch nicht Dietmar. Du kannst deine Bestellung jederzeit in ein Lit ändern, bei dem der STM32 vorbestückst ist. Es ist aktuell nicht wirtschaftlich möglich komplett bestückte PCBs anzubieten. Die Stückzahlen bei denen sich eine Bestückung wirtschaftlich machen ließe liegen weit außerhalb jeder Realität und ich schaffe es zeitlich nicht das zu realisieren.

vy 73
Andreas

Title: Re:OVI40 UI PCB and LCDs can be preordered / Vorbestellungen sind angelaufen
Post by: DL4HAO_Dietmar on 26. May 2021, 18:16:06

Hallo Andreas,
danke fuer die schnelle Antwort, ich habe Dir dazu gerade eine email gesendet (Antwortfunktion auf die von Dir per email gesendete Bestellbestaetigung vom 8.12.2017, incl. Order-ID usw.)

vy73
Dietmar, DL4HAO


Title: Re:OVI40 UI PCB and LCDs can be preordered / Vorbestellungen sind angelaufen
Post by: k9aeg on 10. July 2021, 04:57:33

Quote from: DF8OE on 17. February 2021, 05:57:56
Please stay tuned the next weeks. We are just moving intensively to the new DUC/DDC-PCB which will cover 10KHz...76MHz and using optional fitted AD936f 70MHz...6GHz, too (not just finished FPGA Firmware for the AD936x and final PCBs are under construction). This will change UI a little bit. All owners of "old" PCBs have to solder some wires to fir it to the new UI - this will be eliminated in new PCB.

vy 73
Andreas


I'm a patient man and "staying tuned". So is there any progress report to report at this time in Mid July of 2021?)


Title: Re:OVI40 UI PCB and LCDs can be preordered / Vorbestellungen sind angelaufen
Post by: DF8OE on 10. July 2021, 06:51:28

Yes - there is progress. But not ready yet. If you take a look at GitHub branch directsampling-dev you will see that integration of new board has already begun.

vy 73
Andreas

Title: Re:OVI40 UI PCB and LCDs can be preordered / Vorbestellungen sind angelaufen
Post by: SP3OSJ on 10. July 2021, 13:24:24

Hi Andreas

Are you sure this will be a TRX from 10kHz to 6GHz?
No factory can do that, that is a very large frequency range. I am already looking forward to the release day of the new TRX. Don't make us wait any longer.

73
Artur

Title: Re:OVI40 UI PCB and LCDs can be preordered / Vorbestellungen sind angelaufen
Post by: DF8OE on 10. July 2021, 15:47:44

Yes Artur, it will cover this area. Without transverters or similar stages. The electrical design is ready and working. I am fixing many small bugs and things that can be done better. My old problem which never will leave me: a lack of time. But it is stepping forward.

Also I have designed a PA which covers the area from 70MHz...2.5GHz with 10W output. The integrated circuit which I use is not cheap - it is ~150,-- Euros (included VAT). But show me another TRX which is capable to give 10W output on all amateur radio bands from 4m to 13cm...

EDIT:
To be clear: I do not have designed the PCB for the PA - I use the layout the manufacturer has published and which is tested. I only have designed the input and output filter stages.

vy 73
Andreas


Diskussions- und Newsboard des DARC-Ortsverbandes I40 | Powered by YaBB SE
© 2001-2003, YaBB SE Dev Team. All Rights Reserved.