Diskussions- und Newsboard des DARC-Ortsverbandes I40 
allgemeine Kategorie => OVI40 SDR Projekt (English AND German discussions around OVI40 SDR project) => Message started by: WD8BXS on 06. March 2018, 17:29:12
Title: NO DITS
Post by: WD8BXS on 06. March 2018, 17:29:12
I have no DITs, I have DAH's but no Dits, it seems that D6 might be defective. I will have to order another.

Chuck WD8BXS
Title: Re:NO DITS
Post by: DF5LI on 06. March 2018, 19:05:39
Hi Chuck,
I believe your problem with no DITS and your microphone issue have the same reason. Check D5 and D6 and the pins 141 and 142 of the MCU. It looks like there is a solder bridge between these pins.
Title: Re:NO DITS
Post by: WD8BXS on 06. March 2018, 20:50:34
I will check this again. Thanks for the response
Title: Re:NO DITS
Post by: WD8BXS on 07. March 2018, 02:28:28
No bridge between pins, I will have to wait til I get a new diode.
Title: Re:NO DITS
Post by: WD8BXS on 09. March 2018, 23:54:01
Replacing D6 fixed this issue!


Diskussions- und Newsboard des DARC-Ortsverbandes I40 | Powered by YaBB SE
© 2001-2003, YaBB SE Dev Team. All Rights Reserved.