logo
Welcome, Guest. Please Login or Register.
29. March 2024, 12:44:56


Home Help Search Login RegisterWIKIUHSDR Download

Amateurfunk Sulingen
Diskussions- und Newsboard des DARC-Ortsverbandes I40  |  allgemeine Kategorie  |  mcHF Projekt Deutsch / English (here you can discuss everything related to mcHF) (Moderators: DF8OE, DL1PQ)  |  Topic: I Q Adjustment failure <- zurück vorwärts ->
Pages: [1] Go Down Print
   Author  Topic: I Q Adjustment failure  (Read 1043 times)
WD8BXS
alter Hase
****

Offline

Posts: 286





View Profile
I Q Adjustment failure
« on: 21. April 2020, 16:12:53 »

Hi everyone.

Have an older V6 on the bench, it will not do IQ adjustments. No change at all in adjustments.

Changed U3a, U19 on RF board, checked all solder joints.

Can a defective codec cause this problem??
Logged

Thanks,
De WD8BXS vy 73
DF8OE
Administrator
*****

Offline

Posts: 6268



Stellvertr. OVV I40, Jugend / Nachwuchsreferent

View Profile WWW
Re:I Q Adjustment failure
« Reply #1 on: 21. April 2020, 16:59:16 »

Everything that is in the I/Q-chain can cause this issue. You can locate the problem best by looking at the signals using a scope.

I would propose the following guide:

1) check if 0°/90° LO is present at mixer
2) check if coupling transformer is connected properly at mixer
3) check if 48KHz I and Q is present at mixer

This must be true for RX and for TX chain. Of course, if all is ok, the problem can be located between I/Q-connectors from the two boards to codec.

Good luck - stay healthy!
Andreas
« Last Edit: 21. April 2020, 16:59:54 by DF8OE » Logged

Wenn der Wind des Wandels weht, nageln die einen Fenster und Türen zu und verbarrikadieren sich. Die anderen gehen nach draußen und bauen Windmühlen...
qrz.com-Seite von DF8OE
-----------------------------------------------------
>>>> Die Inhalte meiner Beiträge dürfen ohne meine explizite Erlaubnis in jedwedem Medium weiterverbreitet werden! <<<<
WD8BXS
alter Hase
****

Offline

Posts: 286





View Profile
Re:I Q Adjustment failure
« Reply #2 on: 21. April 2020, 23:49:30 »

HA!! imagine my surprise when I discovered that R72 was a capacitor instead of a resistor!!!

Thanks for your help and support.
Stay well also.

Chuck
Logged

Thanks,
De WD8BXS vy 73
Pages: [1] Go Up Print 
Diskussions- und Newsboard des DARC-Ortsverbandes I40  |  allgemeine Kategorie  |  mcHF Projekt Deutsch / English (here you can discuss everything related to mcHF) (Moderators: DF8OE, DL1PQ)  |  Topic: I Q Adjustment failure <- zurück vorwärts ->
Jump to: 


Login with username, password and session length

 Es wird die Verwendung von Browsern die auf der "Blink"-Engine basieren und mindestens
1024x768 Pixel Bildschirmauflösung für die beste Darstellung empfohlen
 
Amateurfunk Die Beiträge sind, sofern nicht anders vermerkt, unter der folgenden Lizenz veröffentlicht:
GNU Free Documentation License 1.3 GNU Free Documentation License 1.3
verbindet!
Powered by MySQL Powered by PHP Diskussions- und Newsboard des DARC-Ortsverbandes I40 | Powered by YaBB SE
© 2001-2004, YaBB SE Dev Team. All Rights Reserved.
- modified by Andreas Richter (DF8OE)
Impressum & Disclaimer
Valid XHTML 1.0! Valid CSS!